Large Round Strainer/Cage and 110mm Swept Bend Kit
This kit is supplied with a 110mm swept bend, making it ideal for use in-between filter chambers.
Strainers are ideal for any inlet or outlet pipe work on filters. The strainer will stop large debris from going into the actual filter. The strainer has been designed to be attached to any 110mm/4” fitting; the strainer cage is manufactured with a joining spigot of 110mm OD. All 110mm/4” fittings such as bends and tees will mount directly onto the strainer itself (if you require any further information on sizing please look at our pipe identification chart supplied)
The strainer can also prevent fish from disappearing through the pipework.
This strainer is also perfect for using in-between ports/inlets in your filter. Stopping any media from leaving its intended chamber.
The strainer has been designed to be cleaned/maintained easily. Simply remove the 4 threaded nuts from the top plate of the strainer; this will give access to the inside
.Strainer/Cage Size: H-160mm Dia- 280mm
A product that is produced to a high quality and one that never disappoints
Please Note: This fitting is solvent weld